Repair Work
Before any repair, a damage analysis is carried out. After initial cleaning of the tong, disassembly, and dimensional inspection, we assess the degree of wear and damage. These findings are documented with photographs.
You will receive the results in the form of a detailed inspection report. Clear and precise descriptions, supported by photographic documentation, provide a comprehensive overview of the condition found.
Below are some examples of repaired lifting devices.
Repair of Convector Plate
Before Repair
Load Pins and Locking Plates made of Stainless Steel 1.4541
After Repair
Before Repair
Specifications:
- Lifting Device: Block Lifting Tong
- Application: For lifting and transporting blocks
- Load Capacity: 5.0 t
- Dead Weight: 0.6 t
- Clamping Range: 500 mm
After Repair
Work Performed:
- Worn joint bearing points re-drilled and bushed
- Various sheet metal components straightened
- Renewal of heat- and wear-resistant build-up welding
- New production of several drive shafts
- New paintwork
- Final UVV inspection
Before Repair
Specifications:
- Lifting Device: Block Lifting Tong
- Application: For lifting and transporting blocks
- Load Capacity: 5.0 t
- Dead Weight: 0.6 t
- Clamping Range: 500 mm
After Repair
Work Performed:
- Worn joint bearing points re-drilled and bushed
- Various sheet metal components straightened
- Renewal of heat- and wear-resistant build-up welding
- New production of several drive shafts
- New paintwork
- Final UVV inspection
Before Repair
Specifications:
- Lastaufnahmemittel: Mehrfachknüppelzange
- Verwendung: mehrere Knüppel aufnehmen und transportieren
- Load Capacity: 5.0 t
- Dead Weight: 2,5 t
- Clamping Range: Ø 1100 mm - 300 mm
After Repair
Work Performed:
- Worn joint bearing points re-drilled and bushed
- Various sheet metal components straightened
- Renewal of heat- and wear-resistant build-up welding
- New production of several drive shafts
- New paintwork
- Final UVV inspection
Before Repair
Specifications:
- Lifting Device: Lifting Beam
- Application: For lifting and transporting scrap containers
- Load Capacity: 8,8 t
- Dead Weight: 3,2 t
- Clamping Range: Ø 600 mm
After Repair
Work Performed:
- Inspection of critical areas using dye penetrant testing
- Gripper arms straightened and additionally reinforced
- Various weld seams ground and re-welded
- Renewal of insulation material
- Inspection of limit switches
- Partial repainting
- Final UVV inspection
Before Repair
Specifications:
- Lifting Device: Motorized Rotating Tong
- Application: For lifting and transporting slabs and blocks
- Load Capacity: 20,0 t
- Dead Weight: 5,2 t
- Clamping Range: Ø 1520 mm - 425 mm
After Repair
Work Performed:
- Worn joint bearing points re-drilled and bushed
- Various sheet metal components straightened
- Renewal of heat- and wear-resistant build-up welding
- New production of several drive shafts
- Partial repainting
- Final UVV inspection
Before Repair
Specifications:
- Lifting Device: Motorized Clamshell Grab
- Application: For lifting and transporting bulk materials
- Dead Weight: 2.145 t
- Capacity: 1.4 m³
After Repair
Work Performed:
- Worn joint bearing points re-drilled and bushed
- Various sheet metal components straightened
- Renewal of heat- and wear-resistant build-up welding
- New production of several drive shafts
- Partial repainting
- Final UVV inspection
Westerbeck Anlagen-Service GmbH
Auf dem Tigge 58a
59269 Beckum
